Physical Testing Equipments

Product Details:

Guillotine Type A4 Sample Cutter is used for accurat and rapid prepration of test pieces and sample in laboratory.
Precision Test Strip Cutter-it is provided with automatic clamping device which by means of clamping beam holds the sheet material firmly prior to the cutting action.provision is kept for cutting the strip sample for tensile test cutting width 15mm ×300mm using fixed size spacer & holding plate.
As per TAPPIT -494,SCAN- 38

Additional Information:

• Item Code: PAP-2057-A-2
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code 8441 We will go for an Annual Maintenance Contract on basis of service charges after sales.

Product Details:

Quadrant Scale is intended for measuring the basis weight GSM of paper and other sheet materials by weighing a small test sample with given dimensions. Scales are calibrated to precision dead weights. This accuracy is maintained as long as the pendulum returns its original form and is kept free from corrosion, distortion, or other causes, which may affect its weight and balance.

GSM is known as Grammage per square meter, which is an important factor in Paper and Packaging industry for measurement. GSM Scale is used to measure the GSM of paper through the weight of paper. Body of GSM Scale is made up of stainless steel. There is a pendulum attached in GSM Scale which is used to calculate the GSM of paper when hanger moves along with it. The accuracy of weighing paper should be proper and the accuracy depends upon the movement of pendulum. This accuracy is maintained as long as pendulum achieved its final position. GSM Scale has tabular pendulum. The gravity provides good stability and reliability to GSM scale. In single graduate scale, scale selects only one template.

Calibration of GSM Scale should be done by precision dead weight. Generally we used 0-250GSM Scale. So we take 20 x 25mm template to measure the GSM of paper. GSM Scale is calibrated to measure the GSM of 20 x 25mm sized templates.Sample of paper taken from the templates placed in the hanger of GSM Scale and then we released the hanger along with pendulum. When pendulum stops moving and become constant then this is the GSM of paper. 0-500 GSM Scale is not used generally but it can use for measuring the GSM of Kraft paper, whose thickness is more than average writing printing paper. The whole process of GSM Scale is done manually.Accuracy of GSM Scale should keep free from corrosion, distortion and other reasons which affect the accuracy of weight.

This instrument is used for measuring the basis weight (GSM of paper) and other sheet materials by weighing a small test sample with given dimensions. Scales are calibrated to precision dead weights. This accuracy is maintained as long as the pendulum returns to its original form and is kept free from corrosion, distortion or other causes which may affect its weight and balance.

Salient Features:

• Sturdy pendulum design combined with low center of gravity gives these scales outstanding stability and reliability.
• Instrument is having rigid tubular pendulum with hardened bearing for needle.
• Basket of Steel Wire cast tripod base with chromium plated leveling screw.
• Stainless Steel tearing templates.
• Quadrant scale in double graduations shows direct weight in GSM.

Note:

• Machine is useful for paper, packaging corrugarion, flexible textile, leather and rubber industry.

Additional Information:

• Item Code: PAP-2051
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges after the sale.

Product Details:

The first step towards the testing of any physical property of material is preparing its test sample. The accuracy and precision in the test result also depends on the efficiency in the preparation of the test samples. For that, we require the different cutters to facilitate the testing and prepare the quick and sharp samples. Sometimes problems with these cutters are also associated. Such as, it doesn’t work properly after the preparation of some samples only or the blade of cutter loses its sharpness. But Pap-Tech Engineers’ Precision Triple Sheer Cutter without any inadequacy or glitch gives you the test sample with perfect dimensions.

As per TAPPIT:

• 535, Scan P-38

Additional Information:

• Item Code: PAP-2057-B

Product Details:

This cutter is used for preparing the sample for edge crush test. The cutter is made up of stainless steel and it is very sharp.

Additional Information:

• Item Code: PAP-2060-E
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges after the sale.

Product Details:

Cobb Sizing Tester is used for measuring the water absorbency of paper or paperboard. Cobb Sizing Tester is made up of stainless steel material, which is corrosion free. Circular pan can be rotated about 180°. Cobb sizing tester is used to measure the absorbency of water of sample sheet. Cobb Sizing Tester has a stainless steel roller also. Roller is used for drying the wet sample sheet. Firstly, we measure the GSM of circular sample sheet of paper or paperboard and then placed in the circular pan filled with water for Cobb Sizing test. Then, pan should be rotated at 180° and wait for few minutes. After sometime we see sample sheet of paper or paperboard absorbed the water. Due to water absorbency weight of paper or paperboard increases. Then, wet paper is pressed by roller to make the paper or paperboard dry.

This process is done manually. Thus, we calculate the GSM of dry paper or paperboard, corrugated fiber board and compare it with the GSM reading of before process. So we can determine the increment of weight after the whole process. COBB Sizing Tester is used for determining the water absorbency of paper, paperboard and corrugated fiberboard. It measures the weight increase of a sample exposed to water for a given time.

Salient Features:

• Convenient spring loaded sample clamping system presses the cylinder against the sample on the rubber mat so that a leak proof seal is obtained.
• The clamping force is adjustable. The cylinder lifts when 2 handle bars are pinched together.
• A device to determination of the weight increase of a sample contact with water for a given time.
• The mass of water absorb in a specific time by a one square meter of paper, board & corrugated fiber board under specified conditions is called water absorptiveness or cobb value.
• It also indicates the additive substance applied during process that improves printing quality and resistance to liquids.

Tilting Type:

• Lid clamped byway of spring loaded finger grips.

As per TAPPIT:

• 441, Scan 12

Additional Information:

• Item Code: PAP-2055
• Packaging Details: The prices mentioned are net and ex-works, Jaipur basis and are exclusive of: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% 100% advance along with purchase order against Proforma Invoice prior to dispatch. Note: We will go for an Annual Maintenance Contract on basis of service charges after sale.

Product Details:

Electronic GSM Balance It is used for measuring the basis weight (GSM of paper )and other similar sheet materials by weighing a small test sample with given dimensions. The GSM of the specimen is being displayed directly on Digital Panel Meter. It is suitsble for different size of paper through keyboard selection.

Digital Quadrant Scale is intended for measuring the GSM of paper and other sheet materials by weighing a small test sample with given dimensions. The GSM of the specimen is being Displayed directly on Digital Panel Meter with accuracy 0.01 GSM.

Salient Features :

• Covered with Transparent Shield.
• Stainless Steel tearing templates.

As per TAPPIT

• 410

Additional Information:

• Item Code: PAP-2052
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% 100% advance against Performa Invoice prior to dispatch. We will go for an Annual Maintenance Contract on basis of service charges after sale.

Product Details:

Electronic GSM Balance It is used for measuring the basis weight (GSM of paper )and other similar sheet materials by weighing a small test sample with given dimensions. The GSM of the specimen is being displayed directly on Digital Panel Meter. It is suitable for different size of paper through keyboard selection.

Digital Quadrant Scale is intended for measuring the GSM of paper and other sheet materials by weighing a small test sample with given dimensions. The GSM of the specimen is being Displayed directly on Digital Panel Meter with accuracy 0.01 GSM

Features :

• Covered with Transparent Shield.
• Stainless Steel tearing templates.

Additional Information:

• Item Code: PAP-2052-GSM
• Production Capacity: 10
• Delivery Time: 15 DAYS
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9031) We will go for an Annual Maintenance Contract on basis of service charges

Product Details:

It is used for measuring the basis weight (GSM of paper )and other similar sheet materials by weighing a small test sample with given dimensions. The GSM of the specimen is being displayed directly on Digital Panel Meter. It is suitsble for different size of paper through keyboard selection.

Product Details:

To Weighing Balance for routines sample analysis in laboratory,the digital weighing balance is available as per their accuracy and weighing capacity. It is used for weighing the chemicals in laboratory or other similar products.
Other ranges with higher accuracy is also available.

Additional Information:

• Item Code: PAP-2053
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges after sales.

Product Details:

Paper Guillotine A4 is used for A4 Cutting paper & Paperboard samples. The Paper Guillotine has a sheet Fibre base and incorporates a guide for the material to be cut. Both top and bottom cutting blades are made from special material and can be resharpened.

Additional Information:

• Item Code: PAP-2057-A4-II
• Delivery Time: within 7 days
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (8441)

Product Details:

It is a manually operated circular (round) cutter with four knives along the perimeter. It is used for cutting circular sample of paper, board and similar materials. One test specimen at a time by turning wheel at 90° rotation (one quarter fitted with for sharp medical grade blade.

Salient Features :

• Several layers of paper profile can be punched out in one operation simultaneously.
• Save considerable amount of time in sample preparation.
• Speedy and accurate cutting.
• Cutting without any deformation and damage.
• It has a high capacity.
• Punch is exchangeable and can be easily resharpened.

Technical–Specification :

• Punch made of special steel.
• Punch Shape of circular knife in wave form.
• It can be used for cutting a very white range of sheet material such as plastics, textiles, paper & paper board.
• It determines basis weight profile in paper machine’s profile.

Additional Information:

• Item Code: PAP-2058-A
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: The prices mentioned are net and ex-works, Jaipur basis and are exclusive of : (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% 100% advance against Performa Invoice prior to dispatch. We will go for an Annual Maintenance Contract on basis of service charges after sale.

Product Details:

Elmendorf Type Tear Resistance Tester: It is used for measuring the resistance against tearing of paper, board, plastic films and other similar materials. An initial cut is made in a set of test piece,which are then torn through a given distance.The work done in the test piece is measured as the loss in potential energy of a pendulum which i free to swing on it horizontal axis.A calibrated scale indicates the mean tearing force.

As Per TAPPIT:

• TAPPIT-414, SCAN P-11, BS 4468, DN 53128. ASTM D 689

Additional Information:

• Item Code: PAP-2064-A
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges after the sale.

Product Details:

Internal Ply Bond Tester is used for determining the internal bond strength of paper,Board and Laminates with Dual capacity pendulam.
Reading are taken directly on calibrated scale.

Measuring range :  0.0- 250ft/lb,
100 to 500 ft/lb in thousand.clamping pressure 50 to 200 psi with supplied spacer ring.

Accessories : we will provide following item along with manual intenal ply bond tester with the max. range of 500 ft.lbs in thousands. 
1. calibration jig attachment with different range of STD. Cal. Weight.
2. Spacer for pressing the sample  

Additional Information:

• Item Code: PAP-2072-A
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges

Product Details:

Vertical Tensile Strength Tester With Digital display of Tensile Strength & Stretch of Paper, Paperboard and similar materials complete with memory for retaining peak value, automatic or normal zero setting, overload and over travel protection facilities. With imported load cell & imported DC motor.

The Microprocessor Based Tensile Strength Tester is used for determining the tensile strength and stretch of sheet materials.

Technical - Specification :

• Measuring Result : Individual results of Tensile Strength, Stretch, TEA, Tensile Stiffness, Breaking Length, Breaking time mean value & Standard Deviation.
• Clamping Length : Selected.
• Accuracy :  1% of reading down to 10% of the load cell capacity.
• Resolutions : 0.025% of nominal load cell range and 0.1 mm in elongation measurement.
• Computer Output : 1. RS 232 C & Printer port Model C 2 interface with pc having a specification a Pentium & specially developed software.

Application Standards:
SCAN P-38 ISO 1924/4, TAPPI 494, , APPITA/ AS 1301.448, BS 4415, CPPA D 34, DIN 533112, TEILL 1

Additional Information:

• Item Code: PAP-2065-A
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: The prices mentioned are net and ex-works, Jaipur basis and are exclusive of : (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges after the sale.

Product Details:

The Microprocessor Based Horizontal Tensile Strength Tester is used for determining the tensile strength and stretch of sheet materials.

Horizontal Tensile Strength Tester - User friendly software guides the operators through all steps of program selection, parameter modification and sample test to minimize to human error during test to provide rapid and efficient determination of tensile strength, stretch, tensile energy absorption (TEA) and tensile stiffness of paper and paperboard with in-built printer, fitted with imported load cell.

Technical - Specification :

• Clamping Length : Selected.
• Accuracy : ± 1% of reading down to 10% of the load cell capacity.
• Resolutions : 0.025% of nominal load cell range and 0.1 mm in elongation measurement.
• Computer Output : 1. RS 232 C & Printer port Model C 2 interface with pc having a specification a Pentium & specially developed software.

Additional Information:

• Item Code: PAP-2065-B
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges after the sale.

Product Details:

Automatic Tearing Resistance Tester -  it has pneumatic clamping of test pieces.Automatic calcutations are done through microprocessor and presentation of measured value to ensure accurate and stable test results.
It can be attached with computer & printer.

As per TAPPIT:

• 414, SCAN P-11, EN 21974, DN 53128.

Additional Information:

• Item Code: PAP-2064-B
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges after the sale.

Product Details:

The Punch and Die Cutter for Plybond Tester are intended for accurate and rapid preparation of test pieces for use in internal ply bond tester.
As per TAPPIT:

• 489, Scan-38.

Strip Punch:

• For preparation of test pieces towards use in Internal Ply Bond test size 1"x12"..

Additional Information:

• Item Code: PAP-2060-C

Product Details:

It is used for cutting paper & paperboard samples. The Punch and Die Cutter for A4 Sheet has a sheet metal base and incorporates a guide for the material to be cut. Both top and bottom cutting blades are made from special knife steel and can be resharpened.

It eliminates testing errors due to sample preparation. Cutting of multi samples simultaneously possible. The cutter is provided with an automatic clamping device, which by means of clamping beam holds the sheet material firmly prior to the cutting action.

Punch & Die manufactured from tempered tool alloy steel to ensure long life. Sturdy Model & easy to operate.

It is intended for accurate and rapid preparation of test pieces for A4 paper test. Punch & Die manufactured from tempered tool alloy steel to ensure long life. Sturdy Model & easy to operate.

Test Piece Sizes: 21 cm x 29.7 cm

As per TAPPIT:

• 489, Scan P-38.

Sheet Punch:

• It is a manually operated compact cutting machine

Additional Information:

• Item Code: PAP-2060-D
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% 100% advance along with purchase order against Performa Invoice prior to dispatch. We will go for an Annual Maintenance Contract on basis of service charges after sale.

Product Details:

It is used for accurate testing of Paper, Paperboard, solid Fiberboard & Corrugated board for RCT, ECT, CCT test and its components as well as performing compression test on all small FCT packages.

An efficient and easy-to-use instrument intended for testing corrugated board and its components as well as performing compression test on all small packages. The sturdy design of the instrument ensures that parallelism of the plate is maintained for accurate results. The instrument is available in two versions - the metric version and the imperial version.

Technical – Specification :

• Measuring Results : Breaking Force in Newtons.
• Measuring Range : 0 - 5000 N and 0 - 1999 N (Metric Version).
• Accuracy : ± 1% of measured value but not better than 0.5% of the
• nominal value.
• Rupture Sensitivity : 2 - 20 % of the relevant maximum load.

Standards:

• As per TAPPI standard 1301 FEFCO NO. 50, CPPAD 24, ISO 7263, SCAN P27, TAPPI T809, ISO 3037, SCAN P33 & SCAN P32.

Other Details:

• Microprocessor Models are available to be connected with computer & printer for memory with past results.

Additional Information:

• Item Code: PAP-2071
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 28% , 18% We will go for an Annual Maintenance Contract on basis of service charges after the sale.

Product Details:

It is an equipment to test the internal fiber bond strength (z direction tensile strength ) of paper board. It shows the strength of board in relation to glue bonding at cartons side seems and possible delimitation on scoring or use of high tack coatings. This equipment is very useful for the evaluation of coated. It is used for determining the internal bond strength of Paper, Board and Laminates. Readings are consolidated on scale with Reading directly on digital display panel. Microprocessor Models are available to be connected with computer & printer for memory with past results.

Our Internal Ply Bond Tester determines the internal bonding Strength of Paper, Paperboard and Laminates by measuring the average energy in thousands of foot-pound required to delaminate the specimen in two Piles.

Salient Feature :

• Made of Heavy cast iron base with built-in leveling device.
• Microprocessor based reading system
• Direct readings in ft, lb, joules and kg/cm.
• Statistical function(last test and average value)
• Manual clamping system.
• Robust frame in steel design to avoid energy loss during test.
• A means of registering the maximum arc enough that the pendulum swings when release

Technical Specification :

• Security cover and Ball-striking head.
• Measurement scale 0 to 500 ft.lb.
• 3 sets of washers for adjusting the adherences pressure of the sample.
• Tape-support, double coated adhesive tape and manual cutting tool.
• A multiple specimen preparation station allows variations of specimen thickness.

Additional Information:

• Item Code: PAP-2072-B
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges after the sale.

Product Details:

The Punch and Die Cutter for Ring Crush Test are intended for accurate and rapid preparation of Cutting of multi samples simultaneously possible. The is provideed with an automatic clamping device which by means of clamping beam which holds the sheet material firmly prior to the cutting action.

The Precision Test Strip Punch & Die Cutters are intended for accurate and rapid preparation of test pieces for use in RCT, CMT & CCT tests.

It eliminates testing errors due to sample preparation. Cutting of multi samples simultaneously possible. The cutter is provided with an automatic clamping device, which by means of clamping beam holds the sheet material firmly prior to the cutting action.

Punch & Die manufactured from tempered tool alloy steel to ensure long life. Sturdy Model & easy to operate.

As per TAPPIT:

• 489,SCAN P-38.

Additional Information:

• Item Code: PAP-2060-B
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 5% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges after the sale.

Product Details:

Our Internal Ply Bond Tester is designed for determining the Internal Bonding Strength of Paper, Paperboard and Laminates, by measuring the average energy, in thousands of foot pound required to delaminate the specimen in two piles, as described by the TAPPI Routine Control Method RC-308.

It is made of heavy cast iron base with built-in leveling device pressure senditive tape dispenser intergral with base. It works with Pneumatic Air supply for auto clamping of samples through air pressure. It is newly made upgraded model which saves time and gives more accuracy for samples.

Additional Information:

• Item Code: PAP-2072-C
• Delivery Time: 15 Days
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) Note: We will go for an Annual Maintenance Contract on basis of service charges

Product Details:

Punch & Die manufactured from tempered tool alloy steel to ensure long life. Sturdy Model & easy to operate.
It eliminates testing errors due to sample preparation. Cutting of multi samples simultaneously possible. The cutter is provided with an automatic clamping device, which by means of pneumatic cylinder & valve holds the sheet material firmly prior to the cutting action.

Additional Information:

• Production Capacity: 5 sheets of 200 Gsm
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% 100% advance along with purchase order against Performa Invoice prior to dispatch. We will go for an Annual Maintenance Contract on basis of service charges after sale.

Product Details:

These cutters are speedy and accurate cutting of circular and squre samples  without any deformation and damage. It is suitable for cutting a very wide range of sheet material such as plastics , textiles, paper and paperboard.

The Precision Test Strip Punch & Die Cutters are intended for accurate and rapid preparation of test pieces for use in Tensile Strength tests.

It eliminates testing errors due to sample preparation. Cutting of multi samples simultaneously possible.

The cutter is provided with an automatic clamping device, which by means of clamping beam, holds the sheet material firmly prior to the cutting action.

Punch & Die manufactured from tempered tool alloy steel to ensure long life. Sturdy Model, easy to operate

As per TAPPIT:

• 489, Scan P-38.

Strip Punch:

• For preparation of test pieces towrds use in Tensiles Strength test.
• Punch & Die manufactured from tempered tool alloy steel to ensure long life. Sturdy Model, easy to operate.

Additional Information:

• Item Code: PAP-2060-A
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges after sales.