Paper Testing Equipments

Product Details:

Gann Type Paper Moisture Meter is an electrical resistance type digital moisture meter. It calculates on the basis of mass of water/ mass of solids. Since the electrical conductivity of paper is considerably affected not only by its moisture content, but also by the paper temperature and various substances contained in the paper, it is necessary to take these influences into consideration in the design of the moisture meters to ensure accurate readings.

Board and Corrugated. The hands close naturally around the ergonomic form of the housing so that the pins on the end of instrument can be pressed into the material to be measured. The thin pins Paper Board and Corrugated Board

Effect of moisture on properties :
Higher GSM and lower Bursting Strength due to higher moisture. Tensile Strength decreases with increasing % RH. The strength of bonds between fibers is reduced. Tensile Stretch increases with increasing % RH. Elmendorf Tear Strength increases with increasing % RH. This is because fibers are more likely to pull out of the structure due to reduced bonding strength. More work needs to be done to complete the tear. Tensile Stiffness decreases with increasing % RH.

Salient Features:

• Handy, quick pocketed sized moisture meter for speedy single or series measurement.
• Completely automatic instrument setting.
• No separate electrodes or leads required.
• Also suitable to measure wood and normal gypsum & mixed plaster

Additional Information:

• Item Code: Pap-2082-A
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges after the sale.

Product Details:

Photovolt Type Brightness Reflectance Tester It is used for electronically measuring and digitally presenting the Brightness, Opacity & Gloss of the paper and other similar material by angular reflectance. Pap-Tech Reflance Meter made with imported opticals.

Reflectance Meter is a modern instrument for electronically measuring and digitally presenting the Brightness AND whiteness by angular reflectance. Pap-Tech Reflectance Meter is made with imported opticals

It gives precision measurements with less than ± 0.5 % FS deviation between the instruments.

Accessories :

• White Enamel Standard.
• Polished Black Glass.
• Cavity represents a sample of zero reflectance

Technical – Specification :

• Sensor : Selenium Photocell.
• Brightness Search Unit : Consist of deep blue gelatine filter #49, between photo voltaic cell, Infra-red absorbing glass and source of light.
• Opacity Search Unit : Consist of green filter of the set of tristimulus filters.
• Gloss Search Unit : Consist Glass filter and measures gloss as specular reflectively at 75º angle of incidence.

As Per TAPPIT:

• 519, T525,T527,T534.

Additional Information:

• Item Code: PAP-2061-A
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges after sales.

Product Details:

Fully Automatic Dead Weight Thickness Micrometer is used for rapid and accurate measurement of thickness of paper, board and plastics. The thickness of sheet is measured as the distance between two circular plane surfaces under a steady pressure 1Kg/cm (98.0 Kpa). It measures thickness of paper, board & plastic films rapidly and accurately. It is a Compact model with digital display. Measuring spindle with constant lowering speed (1 mm/sec) and Single Button Operation (Motorized). Hardened and lapped measuring face. Provided with Mitutoyo (Japan) make add-on Optical. Transducer which scan a line screen. Compact Models with digital display.

• Measuring spindle with constant lowering speed (1 mm/sec) and Single Button Operation (Motorized).
• Hardened and lapped measuring face.
• Provided with Mitutoyo (Japan) make add-on Optical.
• Transducer which scan a line screen. Compact Models with digital display

Additional Information:

• Item Code: PAP-2063-A
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Electronic Stiffness Tester (Bending Type) – Measuring range 0 – 5000 mN, accuracy of load cell within ± 2 % of pure reading but not better than ± % of 5000 mN.It is provided with imported load cell from SWEDA Sweden.As per TAPPI T – 543.

Additional Information:

• Production Capacity: n/a
• Delivery Time: 15-20 days

Product Details:

Lab Bar Coater The given coater is ideal for the application of the varnishes, adhesives, paints, liquid printing inks and many other surfaces coating which require sampling under accurately controlled conditions with variable coating speed. Our coater is well tested against various quality parameters so as to ensure its flawlessness. As well, we offer this coater on varied specifications in order to fulfill the demand of customers.

Lab Bar Coater Or K Control Coater is designed for the application of the paints, varnishes, adhesives, liquid printing inks and many other surfaces coating that require sampling under accurately controlled conditions. With variable coating speed between 2 and 15mm/min. including 7 Nos. coating rods.

Standard Coated Area = 27×15cm.
Features:

• Portable
• Heat resistance
• Flat surface

Additional Information:

• Item Code: PAP-6054
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges after sales.

Product Details:

Reflectance Meter instrument measures brightness, opacity and colour by diffused reflectance according to relevant ISO standards. It gives an instantaneous digital readout, which shows the colour value (XYZ) of pulp, paper, and paperboard, coating agents, filler and other similar materials.

Technical - Specification :

• Specimen Area Measured : 30 mm dia
• Light Source : Quartz Tungsten Halogen Lamps
• Flashes per measurement : 4.0
• Lamp Life (No. of measurements) : 5,00,000
• Illuminator : C Type
• Colour Scales : X, Y, Z; R(X), R(Y), R (Z), ; LUM. x, y, z
• Whiteness : ASTM / CIE
• Yellowness : ASTM
• APPLICATION STANDARDS
• TAPPI, ASTM, ISI, ISO

Additional Information:

• Item Code: PAP-2061-B
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges after sales.

Product Details:

Reflectance Meter is a modern instrument for electronically measuring and digitally presenting the Brightness AND whiteness by angular reflectance. Pap-Tech Reflectance Meter is made with imported opticalsIt gives precision measurements with less than± 0.5 % FS deviation between the instruments

Additional Information:

• Production Capacity: n/a
• Delivery Time: 25-30 days
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18%

Product Details:

• This aluminum foil is standardized on Burst Testers that are adjusted and operated in accordance with the following Standards: PAPTECH D.8 and D19, TAPPI T403 and T807, and ISO 2758 and 2759 using a pressure transducer and a digital readout. The pressure transducer is verified against a dead weight tester that is traceable to the National Physical Laboratory, India
• Standard Aluminum Foil for verification of Bursting Strength Tester

Additional Information:

• Item Code: PAP-TECH01
• Production Capacity: 100
• Delivery Time: 2 Days

Product Details:

Digital Stiffness Tester (Bending Type) - Measuring range 0-5000 mN, accuracy of load cell within ±2% of pure reading buut not better than±1% of 5000mN.

It is provided with imported load cell from SWEMA Sweden.

As per TAPPIT- 543.

Additional Information:

• Item Code: PAP-2062-B
• Delivery Time: 15 DAYS

Product Details:

It is used for testing the average Smoothness, Porosity and Softness of paper and films by determining the time necessary for a certain volume of air to flow through the inserted sample, under a uniform pressure.

Smoothness, Porosity & Softness Tester Equipment is a standard instrument for measuring Smoothness, Porosity and Softness Tester is intended for testing the average Smoothness, porosity and Softness of paper and film.

Standards:

• AS PER TAPPIT-460,SCAN P 19,BS 6538/3,ISO 5636/5.

Option :
Inner cylinder of weight 5 oz fot high porous paper.

Additional Information:

• Item Code: PAP-2067-A
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 28% HSN Code (8419) We will go for an Annual Maintenance Contract on basis of service charges after sales.

Product Details:

Dennison Wax Pick is used for the evaluation ofsurface strength on Paper & Paperboard.Each Wax Pick isof hard resin non – oily type. Each box contains 8sticks of same number. It is simple, easy to use andinexpensive.

TECHNICAL METHOD FOR USE:

• Waxes are heated and applied to surface of the sheet.
• After cooling waxes are pulled from the surface of the shape.
• Wax is used to check if it has pulled fibre of coating from the surface.
• The highest value wax, which does not rapture the surface, is reported as the pick strength of the sheet

OPTION:
2A/3A/4A/5A/6A/7A/8A/9A/10A/11A/12 A/13A/ 14A/16A/18A/20A/23A

Additional Information:

• Item Code: PAP-6051
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% We will go for an Annual Maintenance Contract on basis of service charges after sales.

Product Details:

In schopper type tester loading clamps of spring type gives standard load of 1000gm during the test provided along with FIVE FIGUR COUNTER having hold and zero setting. 

Standards:

• As per TAPPIT-833,ISO-5626

Technical - Specification:

• Working Unit : Two separately working folding units for quicker test.
• Stretching force : Maximum 9.81 N and Minimum 7.55 N
• Folding Roll Diameter : 6 mm
• Distance Between folding rolls : 0.5 mm
• Deflection on either side : 10 mm

Additional Information:

• Item Code: PAP-2074-B
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% We will go for an Annual Maintenance Contract on basis of service charges after sales.

Product Details:

It is used for determining the folding endurance of all kinds of Paper, Paperboard, Foil & Films with a standard folding speed per minute. Kohler Molin Type Folding Endurance Tester Loading clamps of dead weight type giving standard load of 800 gm during the test provided along with Five Figure impulse Counter having hold and zero setting.

The Equipment is used for determining the Folding Endurance of all kinds of paper, cardboard, foil and films up to 0.15 mm. The folding effect on the specimen, loaded by weights, is exerted by the oscillating and rotating movement of the upper clamps.

Standards:

• As per TAPPIT-423, ISO 5626.

Technical - Specification :

• Two specimens can be tested simultaneously. The number of folds is registered by two counters, which are stopped automatically, when the specimen breaks.
• Folding clamps quick grip type of stainless steel for a strip width of 15 mm.
• Absolutely vibration free runs of folding clamp, due to the absence, of a conventional geared drive.
• Loading clamps of with weight bars and weights steps of 50 g give loads between 1.96 and 9.32 N. Standard load according to SCAN and ISO is 7.85 N (corresponding to a weight of 800 g).

Additional Information:

• Item Code: PAP-2074-A
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 28% We will go for an Annual Maintenance Contract on basis of service charges after sales.

Product Details:

The tester enables Patra Type Fluff Tester to be measurd easily after simulating the action of printing press using a dry blanket. It is based on the concept of PIRA. The tster is capable of giving reproducible results and the fluff build - up proceeds at a steady rate with a number of sheets.

Standard:

• As per TAPPI, SCAN, ISO.

Additional Information:

• Item Code: PAP-2069

Product Details:

It is used for determining the smoothness and porosity of paper and board. It is based on rotameter airflow principle. It is provided with three imported variable area flow meter tubes from "Solertran Mobrey LTD., UK " and accesories.

The Bendtsen Smoothness & Porosity Tester is used for determining the smoothness and porosity of paper and board, based on conceptual design of Dr. Bendtsen.

Standards:

• As per TAPPI Um535,DIN 53108,ISO 5636/3,8791/2,SCAN P21,P60,BS 4420.

Technical - Specification :

Measuring range :
5-150ml/min or 50-500 ml/min or 100-3000 ml/min.

Additional Information:

• Item Code: 2067-B
• Delivery Time: 10-15 days
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18%

Product Details:

It is used for determining the smoothness and porosity of paper and board. It is based on rotameter airflow principle. It is provided with three imported variable area flow meter tubes from "Solertran Mobrey LTD., UK " and accesories.

The Bendtsen Smoothness & Porosity Tester is used for determining the smoothness and porosity of paper and board, based on conceptual design of Dr. Bendtsen.

Standards:

• As per TAPPI Um535,DIN 53108,ISO 5636/3,8791/2,SCAN P21,P60,BS 4420.

Technical - Specification :

Measuring range :
5-150ml/min or 50-500 ml/min or 100-3000 ml/min.

Additional Information:

• Item Code: PAP-2067-B
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 28% HSN Code (8419) We will go for an Annual Maintenance Contract on basis of service charges after sales.

Product Details:

The tester enables Patra Type Fluff Tester to be measurd easily after simulating the action of printing press using a dry blanket. It is based on the concept of PIRA. The tster is capable of giving reproducible results and the fluff build - up proceeds at a steady rate with a number of sheets.

Additional Information:

• Item Code: 2069
• Delivery Time: 7-10 days

Product Details:

The instrument measures brightness, opacity and other parameters by diffused reflectance according to relevant ISO standards. It is Microprocessor based and gives out instantaneous digital read printout, that shows the worked out details such as CIE Tristimulus colour, Rx,Ry,Rz,x,y,z,L,a,b, values, yellowness, whiteness of pulp, paperboard, coating agents,filler and other similar materials. It includes built-in-Printer, measurement routine. 

Additional Information:

• Item Code: PAP-2061-C
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges after sales.

Product Details:

The Brightness and colour meter measures color, color purity, degree of yellowness, degree of whiteness, colour matching and colour fastness. It is used to measure diffused brightness colour value,CIE, Tristimulus, Rx,Ry,Rz,x,y,z, L,a,b, LxCxH values, yellowness & whiteness, colour graph etc. by using window base software with automatic solution of filter & illuminations. It is made with imported optical and filters along with Pentium computer colour monitor and printer.

Additional Information:

• Item Code: 2061
• Delivery Time: 30 days

Product Details:

This VALLEY BEATER is made for beating of pulp under standardized conditions in the Laboratory. Motor with V belt drive provided. The unit meets the requirements laid down in relevant TAPPI and SCAN standards

Additional Information:

• Item Code: 3056
• Delivery Time: 30 days

Product Details:

Paper Ash Incinerator is used for determining the ash content in Paper, Cardboard and other Cellulosic material by burning an exactly weighed quantity.
Along with digital Temperature Indicator cum Controller (Range 0-1200ºC).

As per TAPPIT 413.


Options:

• Thermostatic Temperature Control
• Replacement of Heating Elements
• Temperature measuring device

Additional Information:

• Item Code: Pap-2066
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 28% HSN Code (8419) We will go for an Annual Maintenance Contract on basis of service charges after sales.

Product Details:

The Instrument is designed to measure the degree of water absorption of paper i.e. the capillary rise in millimeters by suspending a specimen in a vat filled with water. Height of liquid sucked up for 1 minute or 10 minutes is measured.

The cross arm of the apparatus is fitted with four testing stations of the ruler type with precise indications, facilitating easy and fast starting and also stopping. The cross arm allows the shifting and adjusting so that any desired water level can be selected.

Standard:

• As per TAPPI, SCAN, ISO

Additional Information:

• Item Code: Pap-2078
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

This instrument is designed for determining the penetration time of oil and other liquids through paper and other similar materials by the Surface Resistance Time (SORT) taken for 75% of the surface covered by oil through Photo Electric Digital Timer. Cooling system is provided along with constant temperature regulator.
Used for Writing / Printing and Absorbent Kraft Paper.

Technical Specification:

• The instrument chamber has an orifice for holding the liquid medium and a clamping device for holding the material.
• Penetration time after oil comes in contact with paper is noted by stop watch or electronic timer.
• Suitable range thermometer also provided.

Standards:

• As per TAPPI, SCAN & ISO.

Additional Information:

• Item Code: PAP-2076
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18% HSN Code (9024) We will go for an Annual Maintenance Contract on basis of service charges after sales.

Product Details:

This instrument is designed for determining the penetration time of oil and other liquids through paper and other similar materials by the Surface Resistance Time (SORT) taken for 75% of the surface covered by oil through Photo Electric Digital Timer. Cooling system is provided along with constant temperature regulator.
Used for Writing / Printing and Absorbent Kraft Paper.

Technical Specification:

• The instrument chamber has an orifice for holding the liquid medium and a clamping device for holding the material.
• Penetration time after oil comes in contact with paper is noted by stop watch or electronic timer.
• Suitable range thermometer also provided.

Additional Information:

• Item Code: PAP2076
• Delivery Time: 7-10 days

Product Details:

The Instrument is designed for the determination of the oil absorption resistance of the surface of paper and paperboard.Along with photo electric digital timer.
As per TAPPI,SCAN,ISO

Additional Information:

• Item Code: PAP-2073
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Paper Ash Incinerator is used for determining the ash content in Paper, Cardboard and other Cellulosic material by burning an exactly weighed quantity.
Along with digital Temperature Indicator cum Controller (Range 0-1200ºC).

As per TAPPIT 413.


Options:

• Thermostatic Temperature Control
• Replacement of Heating Elements
• Temperature measuring device

Additional Information:

• Item Code: pap2066
• Delivery Time: 7-10 days

Product Details:

Paper Ash Incinerator is used for determining the ash content in Paper, Cardboard and other Cellulosic material by burning an exactly weighed quantity.
Along with digital Temperature Indicator cum Controller (Range 0-1200ºC).

As per TAPPIT 413.


Options:

• Thermostatic Temperature Control
• Replacement of Heating Elements
• Temperature measuring device

Additional Information:

• Item Code: 2066
• Delivery Time: 7-10 days

Product Details:

This instrument is designed for determining the penetration time of oil and other liquids through paper and other similar materials by the Surface Resistance Time (SORT) taken for 75% of the surface covered by oil through Photo Electric Digital Timer. Cooling system is provided along with constant temperature regulator.
Used for Writing / Printing and Absorbent Kraft Paper.

Technical Specification:

• The instrument chamber has an orifice for holding the liquid medium and a clamping device for holding the material.
• Penetration time after oil comes in contact with paper is noted by stop watch or electronic timer.
• Suitable range thermometer also provided.

Additional Information:

• Production Capacity: n/a
• Delivery Time: 7-10 days

Product Details:

Analog Thickness Gauge is a precisioninstrument for measuring the Thickness of paper, Plastic films, Laminates, Foil or Board. A dial type micrometer is mounted on thebase with a dead weight on top so developa uniform, reproducible constant pressure.The total system is closed in an air tight,transparent enclosure protecting dirt & dust.

Additional Information:

• Item Code: PAP-2063B-3
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Lab Air Knife Coater consists of a welded square shaped frame which contains a transformer. Our offered knife coater is constructed expertly at our manufacturing unit under the guidance of our experts utilizing the finest quality material and advanced technology. Customers can avail this knife coater as per their needs at nominal prices.

It is used for coating the sample sheet materials in 10" x 12" size. The air-knife design of the coater guarantees uniform coating of the coating medium on to the test specimen. It is suitable for coating of latex, ink, lacquer and plastic dispersions etc. Air pressure adjusted by a control knob. As per TAPPI, SCAN, ISO.

Features:

• Heat resistance
• Easy to handle
• Excellent quality

Additional Information:

• Item Code: PAP-6053

Product Details:

The tester enables Patra Type Fluff Tester to be measurd easily after simulating the action of printing press using a dry blanket. It is based on the concept of PIRA. The tster is capable of giving reproducible results and the fluff build - up proceeds at a steady rate with a number of sheets.

Additional Information:

• Delivery Time: 7-10 days
• Packaging Details: (A) Packing & Forwarding Charges @ 3% (B) Insurance & Freight to be covered by the buyer. (C) GST : 18%

Product Details:

A laboratory corrugating machine with digital temp. Controller for producing a sample to evaluate flat crush resistance of corrugating medium. 'A' fluting rolls are heated up to 176° C and maintained with a constant digital temperature controller. Standard model available with 'A' flute.
   Sample size 0.5 inch x 6 inch 

Additional Information:

• Delivery Time: 7-10 days