Pap-Tech Engineers & Associates

Pap-Tech Engineers & Associates

Shivdaspura, Jaipur, Rajasthan
GST No. 08AAQPA4228A2Z4
TrustSEAL Verified
Call 0804860024891% Response Rate
SEND EMAIL
Search Result
40 results found for ""

Digital Fully Automatic Bursting Strength Tester

Digital Fully Automatic Bursting Strength Tester
  • Digital Fully Automatic Bursting Strength Tester
Get Best Quote
Approx. Price: Rs 1.25 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Display4-1/2 digit with high bright LED display.
Model NoPAP-2056 G
Power Consumption250 W
Measuring Range0-50 kg/cm2
Power Supply1-phase 220 V+/-10% AC,50 Hz.
BrandPap-Tech

Digital Fully Automatic Bursting Strength Tester is produced is produced through electric motor and gear to avoid samples slippage under fully automatic control for Manual clamping of specimen & Digital Display.

Fully automatic Bursting Strength Tester with printer determines the Bursting Strength for the Quality Control and Research & Development of paper, board and corrugated board. A test piece is clamped between two concentric plates each having circular opening in the center. Pressure is applied to the under side of a test piece by a rubber diaphragm, which is expanded by pneumatic pressure.

It has heavy cast-iron block & aluminum body, strain gauge pressure transducer, microprocessor system for sample, built-in pneumatic system for the diaphragm, quick connector for calibration, built-in electronics microprocessor and pendrive can be attached with computer & printer.

  • You can also store 250 readings in your memory card.
Process: You can check Bursting Factor of the Paper/Board Feed GSM of the test paper and you will get bursting strength and burst factor of the test paper/board in Decimal by Microprocessor System and with print

Technical - Specification :
  • Measuring results : Individual Bursting Strength values in Kpa or Kg/cm and burst factor for paper
  • Clamping force : 2700 N or extra clamping force adjustable by means of precise pressure regulator. A solenoid valve actuates the raising and lowering of the upper clamp.
  • Accuracy : 0.1 of readout values. The effect of the diaphragm must however be taken into considerations.

Standard:
  • As per TAPPIT-807.
Request
Callback
Yes! I am interested

Digital Bursting Strength Tester with Printer

Digital Bursting Strength Tester with Printer
  • Digital Bursting Strength Tester with Printer
  • Digital Bursting Strength Tester with Printer
Get Best Quote
Approx. Price: Rs 98,000 / PieceGet Latest Price
Product Brochure

Product Details:

Compressed Air For Automatic Clamping Of Sample5 kg / cm2
Dimensions mm830 (L) x 630 (W) x 710 (H)
Least Count0.1 kg/cm2
Model NoPAP-2056 D-2
Weight140 kgs
Range0-7 kg/cm2 & 0-35 kg/cm2
Power Supply0.5 kw Single phase 220 Volts.
BrandPap-Tech

This instrument has Dual Range of Clamping and diaphragm. It is provided with Microprocessor Control and pendrive can be attached with computer & printer. It is used for both paper & board and is known as Microprocessor Double Head Model Attached with Printer.

Featuers:

  • Manual Clamping
  • Two Diaphragm Seats.
  • Selector switch to select either paper testing or board testing.
  • One to accommodate thin rubber diaphragm for testing materials of low strength value like paper, etc. and the other to accommodate moulded rubber diaphragm for testing materials of high strength value like corrugated board, etc.
  • Single push button operation.
  • Provision for adjustment of pre-determined clamping pressure to eliminate variations in clamping pressure when done manually.
  • High precision digital read-out with least count of 0.1 kg/cm².
  • Incorporates Microprocessor based control panel with printer port facility. Pendrive can be attached with computer to make a print also.

 

Request
Callback
Yes! I am interested

Digital Bursting Strength Tester

Digital Bursting Strength Tester
  • Digital Bursting Strength Tester
  • Digital Bursting Strength Tester
Get Best Quote
Approx. Price: Rs 98,000 / PieceGet Latest Price
Product Brochure

Product Details:

Compressed Air For Automatic Clamping Of Sample5 kg / cm2
Dimensions mm830 (L) x 630 (W) x 710 (H)
Least count0.1 kg/cm2
Model NoPAP-2056 D-1
Weight140 kgs
Range0-7 kg/cm2 & 0-35 kg/cm2
Power Supply0.5 kw Single phase 220 Volts
BrandPap-Tech

Bursting Strength Tester (Dual Head) Microprocessor Based Model has following features:

  • Manual Clamping
  • Two Diaphragm Seats.
  • Selector switch to select either paper testing or board testing.
  • One to accommodate thin rubber diaphragm for testing materials of low strength value like paper, etc. and the other to accommodate moulded rubber diaphragm for testing materials of high strength value like corrugated board, etc.
  • Single push button operation.
  • Provision for adjustment of pre-determined clamping pressure to eliminate variations in clamping pressure when done manually.
  • High precision digital read-out with least count of 0.1 kg/cm².
  • Incorporates Microprocessor based control panel with printer port facility. You can attached Pendrive with your computer & printer also
Request
Callback
Yes! I am interested

Analog Bursting Strength Tester

Analog Bursting Strength Tester
  • Analog Bursting Strength Tester
  • Analog Bursting Strength Tester
Get Best Quote
Approx. Price: Rs 45,000 / UnitGet Latest Price
Product Brochure

Product Details:

Motor150W, 220V AC Single Phase as per for order.
Pressure Speed95 +- 5 ml/min.
Specimen Clamp Lower Part33.10 mm +- 0.05
Specimen Clamp Upper Part30.50 mm +- 0.05.

Bursting Strength Tester is intended for measuring the bursting strength of strong paper by submitting it to increasing uniform hydraulic pressure. Single head and single pressure gauge For corrugation boxes 0-35 kg/cm2 For Paper 0-7 kg/cm2

Features : 
  • Heavy Duty Cast Iron body.
  • Manual Clamping Pressure.
  • Motor suspension in rubber cradle.
  • Wheel with screw actuates the raising and lowering of the upper clamp.
  • The Bursting Pressure at the time of rupture is recorded on a sensitive pressure gauge.
  • All pressure gauges are statically and dynamically calibrated.
  • One pressure gauge is fitted as standard.
  • Units supplied with ‘C’ spanner, 2 spare diaphragms, one alluminium foil and bursting fluid 
Request
Callback
Yes! I am interested

Pneumatic Bursting Strength Tester

Pneumatic Bursting Strength Tester
  • Pneumatic Bursting Strength Tester
Get Best Quote
Approx. Price: Rs 1.25 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Model NoPAP-2056-E
Power SourceElectric
Power Supply220 volts 1 phase
Frequency50 Hz
BrandPap-Tech
Pump Flow Rate95 +/- 5
Power250 W
Pressure Range0-50
Display Type4-1/2 Digital

Pneumatic Bursting Strength Tester with printer determines the Bursting Strength for the Quality Control and Research & Development of paper, board and corrugated board. A test piece is clamped between two concentric plates each having circular opening in the center. Pressure is applied to the under side of a test piece by a rubber diaphragm, which is expanded by pneumatic pressure.

It has heavy cast-iron block & aluminum body, strain gauge pressure transducer, microprocessor system for sample, built-in pneumatic system for the diaphragm, quick connector for calibration, built-in electronics microprocessor and pendrive can be attached with computer & printer.

You can also store 250 readings in your memory card.

Process: You can check Bursting Factor of the Paper/Board Feed GSM of the test paper and you will get bursting strength and burst factor of the test paper/board in Decimal by Microprocessor System and with print

Technical - Specification :
  • Measuring results : Individual Bursting Strength values in Kpa or Kg/cm² and burst factor for paper
  • Clamping force : 2700 N or extra clamping force adjustable by means of precise pressure regulator. A solenoid valve actuates the raising and lowering of the upper clamp.
  • Accuracy : 0.1 of readout values. The effect of the diaphragm must however be taken into considerations.
Request
Callback
Yes! I am interested

Digital Single Head Bursting Strength Tester with Printer

Digital Single Head Bursting Strength Tester with Printer
  • Digital Single Head Bursting Strength Tester with Printer
  • Digital Single Head Bursting Strength Tester with Printer
Get Best Quote
Approx. Price: Rs 78,000 / PieceGet Latest Price
Product Brochure

Product Details:

Display4-1/2 digit with high bright LED display.
Model NoPAP-2056 C-1
Power Consumption250 W
BrandPap Tech
Measuring Range0-7 or 0-35 kg/cm2
Power Supply1-phase 220 V+/-10% AC, 50 Hz.

Digital Type Bursting Strength Tester determines the Bursting Strength for the Quality Control and Research & Development of paper, board and corrugated board. A test piece is clamped between two concentric plates each having circular opening in the center. Pressure is applied to the underside of a test piece by a rubber diaphragm, which is expanded by hydraulic pressure.


It has heavy cast-iron block & aluminum body, strain gauge pressure transducer, microprocessor system for sample, built-in hydraulic system for the diaphragm, quick connector for calibration, built-in electronics and exclusive.

You can also store 250 readings in your memory card.
You can take immediate printout with attached Printer. Pendrive can be attached with computer & printer.

Process: You can check Bursting Factor of the Paper/Board without any manual calculation. Feed GSM of the test paper and you will get bursting strength and burst factor of the test paper/board in Decimal by Microprocessor System.

Technical - Specification :

  • Measuring results : Individual Bursting Strength values in Kpa or Kg/cm².
  • Clamping force : 2700 N or extra clamping force adjustable by means of precise pressure regulator. A solenoid valve actuates the raising and lowering of the upper clamp.
  • Accuracy : 0.1 of readout values. The effect of the diaphragm must however be taken into considerations.


Request
Callback
Yes! I am interested

Pneumatic Double Head Bursting Strength Tester

Pneumatic Double Head Bursting Strength Tester
  • Pneumatic Double Head Bursting Strength Tester
  • Pneumatic Double Head Bursting Strength Tester
Get Best Quote
Approx. Price: Rs 1.35 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Display4-1/2 digit with high bright LED display.
Model NoPAP-2056 F
Power Consumption250 W
Power Supply1-phase 220 V+/-10% AC,50 Hz.
BrandPap-Tech
Clamping Force2700 N

Pneumatic Double Head Bursting Strength Tester with printer determines the Bursting Strength for the Quality Control and Research & Development of paper, board and corrugated board. A test piece is clamped between two concentric plates each having circular opening in the center. Pressure is applied to the under side of a test piece by a rubber diaphragm, which is expanded by pneumatic pressure in two heads.

It has heavy cast-iron block & aluminum body, strain gauge pressure transducer, microprocessor system for sample, built-in pneumatic system for the diaphragm, quick connector for calibration, built-in electronics microprocessor and pendrive can be attached with computer & printer.

  • You can also store 250 readings in your memory card.
Process: You can check Bursting Factor of the Paper/Board Feed GSM of the test paper and you will get bursting strength and burst factor of the test paper/board in Decimal by Microprocessor System and with print

Technical - Specification :
  • Measuring results : Individual Bursting Strength values in Kpa or Kg/cm² and burst factor for paper
  • Pump flow rate : 95 ± 5 ml/min.
  • Measuring range : 0-7 kg/cm² or 0-35 kg/cm2
Request
Callback
Yes! I am interested

Pneumatic Single Head Bursting Strength Tester

Pneumatic Single Head Bursting Strength Tester
  • Pneumatic Single Head Bursting Strength Tester
Get Best Quote
Approx. Price: Rs 97,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Mediumna
Display TypeDigital
GradeA
Country of OriginMade in India
Net Weight (Kg)70-80

Pneumatic Single Head Bursting Strength Tester with printer determines the Bursting Strength for the Quality Control and Research & Development of paper, board and corrugated board. A test piece is clamped between two concentric plates each having circular opening in the center. Pressure is applied to the under side of a test piece by a rubber diaphragm, which is expanded by pneumatic pressure in two heads.

It has heavy cast-iron block & aluminum body, strain gauge pressure transducer, microprocessor system for sample, built-in pneumatic system for the diaphragm, quick connector for calibration, built-in electronics microprocessor and pendrive can be attached with computer & printer.

  • You can also store 250 readings in your memory card.
Process: You can check Bursting Factor of the Paper/Board Feed GSM of the test paper and you will get bursting strength and burst factor of the test paper/board in Decimal by Microprocessor System and with print

Technical - Specification :
  • Measuring results : Individual Bursting Strength values in Kpa or Kg/cm² and burst factor for paper
  • Pump flow rate : 95 ± 5 ml/min.
  • Measuring range : 0-7 kg/cm² or 0-35 kg/cm2
Request
Callback
Yes! I am interested

Single Head Digital Bursting Strength Tester

Single Head Digital Bursting Strength Tester
  • Single Head Digital Bursting Strength Tester
  • Single Head Digital Bursting Strength Tester
Get Best Quote
Approx. Price: Rs 75,000 / PieceGet Latest Price
Product Brochure

Product Details:

Display4-1/2 digit with high bright LED display.
Model NoPAP-2056 C-1
Power Consumption250 W
Measuring Range0-35 kg/cm2 or 0-7 kg/cm2
Power Supply1-phase 220 V+-10% AC, 50 Hz
BrandPap-Tech
Pump Flow Rate95 +/- 5

Digital Bursting Strength Tester determines the Bursting Strength for the Quality Control and Research & Development of paper, board and corrugated board. A test piece is clamped between two concentric plates each having circular opening in the center. Pressure is applied to the under side of a test piece by a rubber diaphragm, which is expanded by hydraulic pressure.

It has heavy cast-iron block & aluminum body, strain gauge pressure transducer, built-in hydraulic system for the diaphragm, quick connector for calibration, built-in microprocessor and pendrive can be attached with computer & printer.

 

  • You can also store 250 readings in your memory card.
Process: You can check Bursting Factor of the Paper/Board without any manual calculation. Feed GSM of the test paper and you will get bursting strength and burst factor of the test paper/board in Decimal by Microprocessor System.

Technical - Specification :

  • Measuring results : Individual Bursting Strength values in Kpa or Kg/cm².
  • Clamping force : 2700 N or extra clamping force adjustable by means of precise pressure regulator. A solenoid valve actuates the raising and lowering of the upper clamp.
  • Accuracy : 0.1 of readout values. The effect of the diaphragm must however be taken into considerations.

 

Request
Callback
Yes! I am interested

Pouch Burst Strength Tester

Pouch Burst Strength Tester
  • Pouch Burst Strength Tester
Get Best Quote
Approx. Price: Rs 99,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Larger Plateform Size350x350x100mm
Least Count1 kgf
Peak Hold Max Reading0-150 kgf
Standard Plateform Size200x200x50mmm
Suitable Larger Packs100-1500 ml
BrandPap Tech
Frequency50 Hz
Voltage230 V
Capacity50-150 kg/cm2
Accuracy2 kgf
Display TypeDigital

Pouch Burst /Compression Tester is an equipment to test the seal integrity / seal Strength of liquid/ semi solid filled pouches with or without gas / air such as shampoos/ oil tea leaves in pouches/ wafers/ chips packed on FFS Machines.

Features:
  • Constant rate of Loading.
  • Constant rate of Travel.
  • Digital model
  • With calibration facility
  • We can do two types of test on this machine
  • A dynamic load test
  • B static load test
  • Operational manual will be supplied with machine
  • Dynamic load test
  • The sample is compressed only upto the set load setpoint predetermined by you
  • If pouch bursts before the set point then this become destructive test
  • This machine stops automatically on sample failure or when the pre-set load achieved
  • Static load test
  • Sample is compressed upto the load setpoint
  • predetermined by you
  • Force is held on the pouch for some time
  • After the time elapses machine return to original position automatically
  • Machine stops automatically on sample failure or when pre set load is achieved
Request
Callback
Yes! I am interested

Aluminium Verification Foil For Bursting Strength Tester

Aluminium Verification Foil For Bursting Strength Tester
  • Aluminium Verification Foil For Bursting Strength Tester
Get Best Quote
Approx. Price: Rs 500 / SetGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Set
Opening In Lower ClampNo Find
Display TypeAnalog
GradeA
VoltageNo Find
Overall Dimensions (L*W*H)16" x 3.5"

  • This aluminum foil is standardized on Burst Testers that are adjusted and operated in accordance with the following Standards: PAPTECH D.8 and D19, TAPPI T403 and T807, and ISO 2758 and 2759 using a pressure transducer and a digital readout. The pressure transducer is verified against a dead weight tester that is traceable to the National Physical Laboratory, India
  • Standard Aluminum Foil for verification of Bursting Strength Tester
  • It is used for testing purpose.
Request
Callback
Yes! I am interested

Analog Model Bursting Strength Tester

Analog Model Bursting Strength Tester
  • Analog Model Bursting Strength Tester
  • Analog Model Bursting Strength Tester
Get Best Quote
Approx. Price: Rs 60,000 / UnitGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Unit
voltage220V
Pressure Resolution170 +-10ml -min.
Power Supply150W
Opening In Upper Clamp31.50 mm +-0.05.
Opening In Lower Clamp31.50 mm +- 0.05.
Frequency50 Hz
BrandPap-Tech
Weight (kg)Up to 7 kg
Display TypeAnalog

Analog Model Bursting Strength Tester is a widely used for measuring resistance to rapture in various materials. A test specimen is held between two circular clamps and subjected to an increasing pressure from a rubber diaphragm. The rubber diaphragm is expanded by a controlled hydraulic pressure until the test specimen reptured.Double head and double gauge for corrugation textile and paper

0-7 kg and 0-35 kg
FEATURES-

Fully enclosed body panel mounted gauges

and operating switches.

Single push button cycle.

Dual head for Paper & Board testing and corrugation testing

Lazy hand (maximum Printer) for maximum burst reading.

Heavy duty industrial Bourdon pressure gauges for

greater durability.

Switch from one head to another by a simple switch.
Request
Callback
Yes! I am interested

Analog Bursting Strength Tester

Analog Bursting Strength Tester
  • Analog Bursting Strength Tester
  • Analog Bursting Strength Tester
Get Best Quote
Approx. Price: Rs 45,000 / PieceGet Latest Price
Product Brochure

Product Details:

Opening In Lower Clampn/a
Display TypeAnalog
BrandPap -Tech
Grademanual
Voltage220 v
Country of OriginMade in India

Bursting Strength Tester is intended for measuring the bursting strength of strong paper by submitting it to increasing uniform hydraulic pressure. Single head and single pressure gauge For corrugation boxes 0-35 kg/cm2 For Paper 0-7 kg/cm2

Features : 
  • Heavy Duty Cast Iron body.
  • Manual Clamping Pressure.
  • Motor suspension in rubber cradle.
  • Wheel with screw actuates the raising and lowering of the upper clamp.
  • The Bursting Pressure at the time of rupture is recorded on a sensitive pressure gauge.
  • All pressure gauges are statically and dynamically calibrated.
  • One pressure gauge is fitted as standard.
  • Units supplied with ‘C’ spanner, 2 spare diaphragms, one alluminium foil and bursting fluid 
Request
Callback
Yes! I am interested

Analog Type Bursting Strength Tester

Analog Type Bursting Strength Tester
  • Analog Type Bursting Strength Tester
  • Analog Type Bursting Strength Tester
Get Best Quote
Approx. Price: Rs 48,000 / UnitGet Latest Price
Product Brochure

Product Details:

Model NoPAP-2056-A-2
Motor150W,220V AC Single Phase
Pressure Speed170 +-10ml/min.
Specimen Clamp Lower Part31.50 mm +- 0.05.
Specimen Clamp Upper Part31.50 mm +- 0.05.
BrandPap Tech

Analog Type Bursting Strength Tester is intended for measuring the bursting strength of strong paper & Boards by submitting it to increasing uniform hydraulic pressure. Single head with double pressure gauge on wall:
  • Gauge 1- 0-7 Kg/cm2
  • Gauge 2- 0-35 Kg/cm2

Salient Features:
  • Heavy Duty Cast Iron body.
  • Manual Clamping Pressure.
  • Motor suspension in rubber cradle.
  • Wheel with screw actuates the raising and lowering of the upper clamp.
  • The Bursting Pressure, at the time of rupture is recorded on a sensitive pressure gauge.
  • All pressure gauges are statically and dynamically calibrated.
  • Two pressure gauges are fitted as standard.
  • Units supplied with C spanner, 3 spare diaphragms, one alluminium foil and glycol topping- up fluid.
Request
Callback
Yes! I am interested

Paptech Gurley Paper Smoothness & Porosity Tester

Paptech Gurley Paper Smoothness & Porosity Tester
  • Paptech Gurley Paper Smoothness & Porosity Tester
  • Paptech Gurley Paper Smoothness & Porosity Tester
Get Best Quote
Approx. Price: Rs 90,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Opening In Lower Clampn/a
Display TypeDigital
BrandPap -Tech
GradeAutomatic
Frequency50 Hz
Voltage220 v

It is used for testing the average Smoothness, Porosity and Softness of paper and films by determining the time necessary for a certain volume of air to flow through the inserted sample, under a uniform pressure.

Smoothness, Porosity & Softness Tester Equipment is a standard instrument for measuring SmoothnessPorosity and Softness Tester is intended for testing the average Smoothness, porosity and Softness of paper and film.

Standards:
  • AS PER TAPPIT-460,SCAN P 19,BS 6538/3,ISO 5636/5.
Option :
Inner cylinder of weight 5 oz fot high porous paper.
Request
Callback
Yes! I am interested

Digital Paper Tear Resistance Tester

Digital Paper Tear Resistance Tester
  • Digital Paper Tear Resistance Tester
Get Best Quote
Approx. Price: Rs 1.5 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Model NoPAP-2064-B
Power Consumption50 W
BrandPap-Tech
Accuracy+/- 1%
PhaseSingle Phase
Voltage220 V
Frequency50 Hz

Automatic Tearing Resistance Tester -  it has pneumatic clamping of test pieces.Automatic calcutations are done through microprocessor and presentation of measured value to ensure accurate and stable test results.
It can be attached with computer & printer.

As per TAPPIT:
  • 414, SCAN P-11, EN 21974, DN 53128.
Request
Callback
Yes! I am interested

Digital Paper Stiffness Tester with Printer

Digital Paper Stiffness Tester with Printer
  • Digital Paper Stiffness Tester with Printer
  • Digital Paper Stiffness Tester with Printer
Get Best Quote
Approx. Price: Rs 1.75 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2 Piece
Phasen/a
Measuring Range0-5000 mN
Loadn/a
Frequency0-5000 mN
DisplayDigital
Accuracy+/-2%
ColorBlue
Automation GradeSemi-Automatic

Electronic Stiffness Tester (Bending Type) – Measuring range 0 – 5000 mN, accuracy of load cell within ± 2 % of pure reading but not better than ± % of 5000 mN.It is provided with imported load cell from SWEDA Sweden.As per TAPPI T – 543.
Request
Callback
Yes! I am interested

Digital Stiffness Tester Bending Type

Digital Stiffness Tester Bending Type
  • Digital Stiffness Tester Bending Type
Get Best Quote
Approx. Price: Rs 1.75 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Model NoPAP-2062
Weight40 Kg Approximate
Voltage220 V, AC
TypeDigital
Power Source220 V, AC
PhaseSINGLE PHASE
Frequency50 HZ
Accuracy+/-2%
BrandPAP-TECH
ColorBLUE & WHITE
Automation GradeSemi-Automatic

Stiffness Tester is designed for evaluating stiffness and resilient qualities of paper, plastics, cardboard, light metallic sheets, foil and other flexible material having comparatively strong bending resistance. Specimen is bent by 15 degree at a constant speed and when it becomes 50 mm in load length, bending moment required to bent specimen is measured in gcm unit and the stiffness of the material is determined. Rotation occurs clockwise and counters clockwise, so that stiffness can be measured in both the directions. Digital readout provides fast and accurate test results.
Request
Callback
Yes! I am interested

Ring Crush Tester Rct Tester

Ring Crush Tester Rct Tester
  • Ring Crush Tester Rct Tester
  • Ring Crush Tester Rct Tester
Get Best Quote
Approx. Price: Rs 1.35 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Opening In Lower ClampN/A
Display TypeDigital
GradeSemi Automatic
Voltage220 v
PhaseSingle Phase
Power220 V, 50 c/s.

It is used for accurate testing of Paper, Paperboard, solid Fiberboard & Corrugated board for RCT, ECT, CCT test and its components as well as performing compression test on all small FCT packages.

An efficient and easy-to-use instrument intended for testing corrugated board and its components as well as performing compression test on all small packages. The sturdy design of the instrument ensures that parallelism of the plate is maintained for accurate results. The instrument is available in two versions - the metric version and the imperial version.

Technical – Specification :
  • Measuring Results : Breaking Force in Newtons.
  • Measuring Range : 0 - 5000 N and 0 - 1999 N (Metric Version).
  • Accuracy : ± 1% of measured value but not better than 0.5% of the
  • nominal value.
  • Rupture Sensitivity : 2 - 20 % of the relevant maximum load.

Standards:
  • As per TAPPI standard 1301 FEFCO NO. 50, CPPAD 24, ISO 7263, SCAN P27, TAPPI T809, ISO 3037, SCAN P33 & SCAN P32.

Other Details:

  • Microprocessor Models are available to be connected with computer & printer for memory with past results.
Request
Callback
Yes! I am interested

Paper Ring Crush Tester

Paper Ring Crush Tester
  • Paper Ring Crush Tester
  • Paper Ring Crush Tester
Get Best Quote
Approx. Price: Rs 1.35 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Opening In Lower Clampn/a
Display TypeDigital
GradeSemi-Automatic
Voltage220 v
PhaseSingle Phase
Power220 V, 50 c/s.

It is used for accurate testing of Paper, Paperboard, solid Fiberboard & Corrugated board for RCT, ECT, CCT test and its components as well as performing compression test on all small FCT packages.

An efficient and easy-to-use instrument intended for testing corrugated board and its components as well as performing compression test on all small packages. The sturdy design of the instrument ensures that parallelism of the plate is maintained for accurate results. The instrument is available in two versions - the metric version and the imperial version.

Technical – Specification :
  • Measuring Results : Breaking Force in Newtons.
  • Measuring Range : 0 - 5000 N and 0 - 1999 N (Metric Version).
  • Accuracy : ± 1% of measured value but not better than 0.5% of the
  • nominal value.
  • Rupture Sensitivity : 2 - 20 % of the relevant maximum load.

Standards:
  • As per TAPPI standard 1301 FEFCO NO. 50, CPPAD 24, ISO 7263, SCAN P27, TAPPI T809, ISO 3037, SCAN P33 & SCAN P32.

Other Details:

  • Microprocessor Models are available to be connected with computer & printer for memory with past results.
Request
Callback
Yes! I am interested

Fully Automatic Bomb Calorimeter

Fully Automatic Bomb Calorimeter
  • Fully Automatic Bomb Calorimeter
Get Best Quote
Approx. Price: Rs 2.5 Lakh / UNITGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 UNIT
Model NoPAP-5055-C
Temperature Resolution0.01 Degree Celcius
Power Supply220 V
Gcv RangeUp to 10,000 Kcal
DisplayBig Jumbo LCD 20x4 display
BrandPAP-TECH

This instrument is used to evaluate the calorific value of solid & liquid fuel. It is microprocessor based and automatic calculation and measurements are done. It's In built thermal printer has PC software for Data Record. Final Test report printout is with date and time.

Significant Features:
  • Microprocessor based
  • Beckmann Thermometer (High Precision)
  • Automatic Measurement & Calculation of Calorific
  • Value/Water Equivalent Big Jumbo LCD 20x4 display (Blue Colour)
  • PC Software for Data Record
  • 16 soft touch keypad
  • Weight of mass feed able
  • Water Equivalent value feed able
  • Final Test report printout with Date & Time
  • Alarm on Firing & Final reading
  • Fuse wire Open detection & LED indication
  • No Paper" or "Printer's Door Open" Detection
  • Type of Test Select able
  • Real Time Clock
  • Internal Data Logger with Computer Interface
  • Push-n-Fit type Gas filling System for User
Request
Callback
Yes! I am interested

Fully Automatic Dead Weight Paper Sheet Thickness Micrometer

Fully Automatic Dead Weight Paper Sheet Thickness Micrometer
  • Fully Automatic Dead Weight Paper Sheet Thickness Micrometer
  • Fully Automatic Dead Weight Paper Sheet Thickness Micrometer
Get Best Quote
Approx. Price: Rs 95,000 / PackGet Latest Price
Product Brochure

Product Details:

Model NoPAP-2063 B-III
Power SupplySingle Phase 230/240 V,25 W
Steady Pressure1 Kg/cm2 (98.0 Kpa)
Throat Depth75 mm
Resolution1
BrandPap Tech
Measuring Range0-20 mm

Fully Automatic Dead Weight Thickness Micrometer is used for rapid and accurate measurement of thickness of paper, board and plastics. The thickness of sheet is measured as the distance between two circular plane surfaces under a steady pressure 1Kg/cm (98.0 Kpa). It measures thickness of paper, board & plastic films rapidly and accurately. It is a Compact model with digital display. Measuring spindle with constant lowering speed (1 mm/sec) and Single Button Operation (Motorized). Hardened and lapped measuring face. Provided with Mitutoyo (Japan) make add-on Optical. Transducer which scan a line screen. Compact Models with digital display.

  • Measuring spindle with constant lowering speed (1 mm/sec) and Single Button Operation (Motorized).
  • Hardened and lapped measuring face.
  • Provided with Mitutoyo (Japan) make add-on Optical.
  • Transducer which scan a line screen. Compact Models with digital display
Request
Callback
Yes! I am interested

Tensile Strength Machine

Tensile Strength Machine
  • Tensile Strength Machine
  • Tensile Strength Machine
Get Best Quote
Approx. Price: Rs 1.5 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Usage/ApplicationLaboratory
MaterialMild Steel
Display TypeDigital
Capacity10/day
Model Name/NumberPAP-2065

Vertical Tensile Strength Tester With Digital display of Tensile Strength & Stretch of Paper, Paperboard and similar materials complete with memory for retaining peak value, automatic or normal zero setting, overload and over travel protection facilities. With imported load cell & imported DC motor.

The Microprocessor Based Tensile Strength Tester is used for determining the tensile strength and stretch of sheet materials.

Technical - Specification :

  • Measuring Result : Individual results of Tensile Strength, Stretch, TEA, Tensile Stiffness, Breaking Length, Breaking time mean value & Standard Deviation.
  • Clamping Length : Selected.
  • Accuracy :  1% of reading down to 10% of the load cell capacity.
  • Resolutions : 0.025% of nominal load cell range and 0.1 mm in elongation measurement.
  • Computer Output : 1. RS 232 C & Printer port Model C 2 interface with pc having a specification a Pentium & specially developed software.


Application Standards:
SCAN P-38 ISO 1924/4, TAPPI 494, , APPITA/ AS 1301.448, BS 4415, CPPA D 34, DIN 533112, TEILL 1

Request
Callback
Yes! I am interested

Digital Paper Core Pipe Compression Strength Tester

Digital Paper Core Pipe Compression Strength Tester
  • Digital Paper Core Pipe Compression Strength Tester
  • Digital Paper Core Pipe Compression Strength Tester
Get Best Quote
Approx. Price: Rs 1.35 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
BrandPap-Tech
Model Name/NumberPAP- 4062
Capacity500-2000 (Newton per ton cm)
Power Supply220 V, AC
Accuracy Grade2% / 0.2% of full scale

Pap Tech Digital  Core/ Cone Compression Tester is an equipment to test paper tubes/ cores & cones for:

  • Radial Compression/ Crush.
  • Horizontal Compression /Crush.
  • Vertical/Crush.

Salient Features:
  • Machine designed on proven principle of pneumatics.
  • Easy and safe to operate.
  • Skilled manpower is not required.
  • Zero maintenance machine.
  • Provides in – house quality control system at affordable price.
  • Highest degree of consistency and reliability 

Application Standards ASTM D 3654:
  • Option 50/100 Kg Cast iron weight Regular / Deluxe / Digital Model
Request
Callback
Yes! I am interested

Pulp Disintegration Tester

Pulp Disintegration Tester
  • Pulp Disintegration Tester
  • Pulp Disintegration Tester
Get Best Quote
Approx. Price: Rs 99,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Rotational Frequency2975 +/- 25 rpm
Model NumberPAP-3062
Voltage440 V AC
Power0.5 kW
Capacity2 Litres
PhaseSingle Phase

The Instrument is designed for standardized disintegration of pulp to a homogeneous suspension. Pivoted drive unit with stainless steel propeller and shaft. The propeller is driven by electric motor via stepped timing belt, which ensures a direct drive without slippage. Electronic Revolution counters with digital display.

Option :
  • Mechanical Preset impulse counter on front panel for setting desired number revolution.
  • Digital Preset Pulse Counter on front panel for setting desired number of revolution.
  • Pulp container with Heating Elements and Thermostat control
Request
Callback
Yes! I am interested

Paptech Oil Penetration Tester

Paptech Oil Penetration Tester
  • Paptech Oil Penetration Tester
Get Best Quote
Approx. Price: Rs 80,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
MaterialStainless Steel
TypeWilliam Type
ColorBlue
BrandPAP Tech
Usage/Applicationna
Automation GradeAutomatic

This instrument is designed for determining the penetration time of oil and other liquids through paper and other similar materials by the Surface Resistance Time (SORT) taken for 75% of the surface covered by oil through Photo Electric Digital Timer. Cooling system is provided along with constant temperature regulator.
Used for Writing / Printing and Absorbent Kraft Paper.

Technical Specification:
  • The instrument chamber has an orifice for holding the liquid medium and a clamping device for holding the material.
  • Penetration time after oil comes in contact with paper is noted by stop watch or electronic timer.
  • Suitable range thermometer also provided.
Request
Callback
Yes! I am interested

Penetration Resistance Tester

Penetration Resistance Tester
  • Penetration Resistance Tester
Get Best Quote
Approx. Price: Rs 80,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
MaterialStainless Steel
Typewilliam type
Voltage220 v AC
Frequency50 HZ
BrandPAP-TECH
ColorBlue
Usage/ApplicationUsed for Writing / Printing and Absorbent Kraft Paper
Weight40-50
Automation GradeAutomatic

This instrument is designed for determining the penetration time of oil and other liquids through paper and other similar materials by the Surface Resistance Time (SORT) taken for 75% of the surface covered by oil through Photo Electric Digital Timer. Cooling system is provided along with constant temperature regulator.
Used for Writing / Printing and Absorbent Kraft Paper.

Technical Specification:
  • The instrument chamber has an orifice for holding the liquid medium and a clamping device for holding the material.
  • Penetration time after oil comes in contact with paper is noted by stop watch or electronic timer.
  • Suitable range thermometer also provided.
Request
Callback
Yes! I am interested

Paptech Paper Lab Tear Resistance Tester

Paptech Paper Lab Tear Resistance Tester
  • Paptech Paper Lab Tear Resistance Tester
  • Paptech Paper Lab Tear Resistance Tester
Get Best Quote
Approx. Price: Rs 42,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
ColorBlue
MaterialStainless Steel
Displaymanual
Model Name/NumberPaptech Lab Tear Resistance Tester
BrandPap-Tech
Usage/ApplicationIndustrial

Paptech Tear Resistance Tester: It is used for measuring the resistance against tearing of paper, board, plastic films and other similar materials. An initial cut is made in a set of test piece,which are then torn through a given distance.The work done in the test piece is measured as the loss in potential energy of a pendulum which i free to swing on it horizontal axis.A calibrated scale indicates the mean tearing force.
Request
Callback
Yes! I am interested

Paper test Elmendorf Resistance Tear Tester

Paper test Elmendorf Resistance Tear Tester
  • Paper test Elmendorf Resistance Tear Tester
  • Paper test Elmendorf Resistance Tear Tester
Get Best Quote
Approx. Price: Rs 42,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Accuracy level+/- 1%
Surface FinishPolished
Length50 +/- 2.0 mm
Height62 mm +/- 0.2 mm
BrandPap-Tech
Packaging TypeWooden Box
Model Name/NumberPAP-2064-A

Elmendorf Type Tear Resistance Tester: It is used for measuring the resistance against tearing of paper, board, plastic films and other similar materials. An initial cut is made in a set of test piece,which are then torn through a given distance.The work done in the test piece is measured as the loss in potential energy of a pendulum which i free to swing on it horizontal axis.A calibrated scale indicates the mean tearing force.

As Per TAPPIT:
  • TAPPIT-414, SCAN P-11, BS 4468, DN 53128. ASTM D 689
Request
Callback
Yes! I am interested

Motorised Drop Tester

Motorised Drop Tester
  • Motorised Drop Tester
Get Best Quote
Approx. Price: Rs 1.8 Lakh / PairGet Latest Price
Product Brochure

Product Details:

Capacity50 kg
drop height2000mm
frequency50 hz
Model NoPAP- 4057 A
powerAC
power supply220 v
BrandPap-Tech

The Motorised Drop Tester is designed to ascertain in the laboratory the resistance to rough handling of various types of packaging and is used in both Q.C. (quality control) and R&D (research & development) test routines.Several types of packaging can be tested e.g. card board boxes, pails, bags and containers. Catering for the following types of drops e.g. flat corner & side.The Precision Drop Tester has an open construction arrangement which does not restrict the test sample geometry in height and width. The Drop Tester lifts the pads to the test height saving the operator from injury. accelerating faster than 1G and ensuring precise drop orientations.Its rugged and simple design enables long working periods with minimal maintenance requirements and maximal performance by providing to the user accurate test results with high repeatability.Salient Features :A precise and reliable machine.Sturdy in construction.Precisely machined to International Standards.Fitted with angular drop arrangement for checking transport-worthiness form all angles.Costs less then half of the similar imported tester saves valuable foreign exchange too. Facility for corner droops. BOX SIZE 450X450
Request
Callback
Yes! I am interested

Manual Drop Tester

Manual Drop Tester
  • Manual Drop Tester
Get Best Quote
Approx. Price: Rs 1.5 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Base MaterialSteel
Box Size450X450X800
Maximal Capacity50 KG
Maximal Drop Height2000 mm.
Model NoPAP- 4057
HeightUp to 5 Feet
BrandPap-Tech
Weight (kg)75-150 kg
Power (W)2.5 w
Frequency (Hz)60 Hz

Drop Tester is designed to ascertain in the laboratory the resistance to rough handling of various types of packaging and is used in both Q.C. (quality control) and R&D (research & development) test routines. Several types of packaging can be tested e.g. card board boxes, pails, bags and containers. Catering for the following types of drops e.g. flat corner & side. The Precision Drop Tester has an open construction arrangement which does not restrict the test sample geometry in height and width. The Drop Tester lifts the pads to the test height saving the operator from injury. accelerating faster than 1G and ensuring precise drop orientations. Its rugged and simple design enables long working periods with minimal maintenance requirements and maximal performance by providing to the user accurate test results with high repeatability.

Salient Features :
  • A precise and reliable machine.
  • Sturdy in construction.
  • Precisely machined to International Standards.
  • Fitted with angular drop arrangement for checking transport-worthiness form all angles.
  • Costs less then half of the similar imported tester saves valuable foreign exchange too.
  • Facility for corner droops.
Request
Callback
Yes! I am interested

Elmendorf Tearing Tester

Elmendorf Tearing Tester
  • Elmendorf Tearing Tester
Get Best Quote
Approx. Price: Rs 42,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
GradeManual
Frequency50 Hz
MaterialMild Steel
BrandPAP-TECH
ColorBlue & white
Type Of Testing MachinesPaper
Packaging TypeWooden Box
Model Name/NumberPAP-2064A
Display TypeAnalog
Usage/ApplicationLaboratory

Elmendorf Type Tear Resistance Tester: It is used for measuring the resistance against tearing of paper, board, plastic films and other similar materials. An initial cut is made in a set of test piece,which are then torn through a given distance.The work done in the test piece is measured as the loss in potential energy of a pendulum which i free to swing on it horizontal axis.A calibrated scale indicates the mean tearing force.

As Per TAPPIT:
  • TAPPIT-414, SCAN P-11, BS 4468, DN 53128. ASTM D 689
Request
Callback
Yes! I am interested

Paper Puncture Resistance Tester

Paper Puncture Resistance Tester
  • Paper Puncture Resistance Tester
  • Paper Puncture Resistance Tester
Get Best Quote
Approx. Price: Rs 60,000 / PieceGet Latest Price
Product Brochure

Product Details:

Body MaterialStainless Steel
Surface FinishingPolished
Power Sourcen/a
UsageLaboratory
ModelPAP-4055
BrandPap-tech

This instrument measures puncture resistance of various packing materials and gives reliable indication to evaluate fabrication factors with material values in a composition fashion. The puncture resistance of paperboards is measured as the energy required to force a puncture head of specific design through a test piece of board under specified condition. The test specimen is clamped between two horizontal plates in each of which is a triangular hole. The Puncture Tester has a very heavy chest iron stand in order to avoid disturbing vibrations during a test.

Technical Specifications:
  • 0-5 Nm Scale division 0,1 Nm
  • 0-10 Nm Scale division 0,2 Nm
  • 0-20 Nm Scale division 0,2 Nm
  • 0-36 Nm Scale division 0,2 Nm
Request
Callback
Yes! I am interested

Bendsten Type Smoothness and Porosity Tester

Bendsten Type Smoothness and Porosity Tester
  • Bendsten Type Smoothness and Porosity Tester
  • Bendsten Type Smoothness and Porosity Tester
Get Best Quote
Approx. Price: Rs 2.5 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Air Pressure3 Manostat Weights
Power Supply220 / 240 V Single Phase 50 Hz. / 50 W.
Self Contained air supply5-150,50-500 and 300-3000 ml/min.
BrandPap-Tech
Packaging TypeWooden Box
Model Name/Numberpap-2067-B
Model Number/NamePAP-2067 B

It is used for determining the smoothness and porosity of paper and board. It is based on rotameter airflow principle. It is provided with three imported variable area flow meter tubes from "Solertran Mobrey LTD., UK " and accesories.

The Bendtsen Smoothness & Porosity Tester is used for determining the smoothness and porosity of paper and board, based on conceptual design of Dr. Bendtsen.

Standards:

  • As per TAPPI Um535,DIN 53108,ISO 5636/3,8791/2,SCAN P21,P60,BS 4420.
Technical - Specification :

Measuring range :
5-150ml/min or 50-500 ml/min or 100-3000 ml/min.
Request
Callback
Yes! I am interested

Lab bendesten Paper Smoothness & Porosity Tester

Lab bendesten Paper Smoothness & Porosity Tester
  • Lab bendesten Paper Smoothness & Porosity Tester
  • Lab bendesten Paper Smoothness & Porosity Tester
Get Best Quote
Approx. Price: Rs 2.5 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Opening In Lower Clampn/a
Display TypeAnalog
BrandPap -Tech
GradeSemi-Automatic
Frequency50 Hz
Voltage220 v

It is used for determining the smoothness and porosity of paper and board. It is based on rotameter airflow principle. It is provided with three imported variable area flow meter tubes from "Solertran Mobrey LTD., UK " and accesories.

The Bendtsen Smoothness & Porosity Tester is used for determining the smoothness and porosity of paper and board, based on conceptual design of Dr. Bendtsen.

Standards:

  • As per TAPPI Um535,DIN 53108,ISO 5636/3,8791/2,SCAN P21,P60,BS 4420.
Technical - Specification :

Measuring range :
5-150ml/min or 50-500 ml/min or 100-3000 ml/min.
Request
Callback
Yes! I am interested

Paptech Bendsten Type Smoothness & Porosity Tester

Paptech Bendsten Type Smoothness & Porosity Tester
  • Paptech Bendsten Type Smoothness & Porosity Tester
  • Paptech Bendsten Type Smoothness & Porosity Tester
Get Best Quote
Approx. Price: Rs 2.5 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Opening In Lower Clampn/a
Display TypeAnalog
BrandPap -Tech
GradeSemi-Automatic
Frequency50 Hz
Voltage220 v

It is used for determining the smoothness and porosity of paper and board. It is based on rotameter airflow principle. It is provided with three imported variable area flow meter tubes from "Solertran Mobrey LTD., UK " and accesories.

The Bendtsen Smoothness & Porosity Tester is used for determining the smoothness and porosity of paper and board, based on conceptual design of Dr. Bendtsen.

Standards:

  • As per TAPPI Um535,DIN 53108,ISO 5636/3,8791/2,SCAN P21,P60,BS 4420.
Technical - Specification :

Measuring range :
5-150ml/min or 50-500 ml/min or 100-3000 ml/min.
Request
Callback
Yes! I am interested

Fully Automatic Paper Thickness Instrument

Fully Automatic Paper Thickness Instrument
  • Fully Automatic Paper Thickness Instrument
Get Best Quote
Approx. Price: Rs 90,000 / PieceGet Latest Price
Product Brochure

Product Details:

Opening In Lower Clampn/a
Display TypeDigital
GradeAutomatic
Depth75mm
Usage/ApplicationLaboratory
MaterialN/a
Colorblue
Model Name/NumberPAP-2063-B-|||

Fully Automatic Dead Weight Thickness Micrometer is used for rapid and accurate measurement of thickness of paper, board and plastics. The thickness of sheet is measured as the distance between two circular plane surfaces under a steady pressure 1Kg/cm (98.0 Kpa). It measures thickness of paper, board & plastic films rapidly and accurately. It is a Compact model with digital display. Measuring spindle with constant lowering speed (1 mm/sec) and Single Button Operation (Motorized). Hardened and lapped measuring face. Provided with Mitutoyo (Japan) make add-on Optical. Transducer which scan a line screen. Compact Models with digital display.

  • Measuring spindle with constant lowering speed (1 mm/sec) and Single Button Operation (Motorized).
  • Hardened and lapped measuring face.
  • Provided with Mitutoyo (Japan) make add-on Optical.
  • Transducer which scan a line screen. Compact Models with digital display
Request
Callback
Yes! I am interested

Peel Bond Strength Tester

Peel Bond Strength Tester
  • Peel Bond Strength Tester
Get Best Quote
Approx. Price: Rs 1.35 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Frequency50 -60 HZ
Voltage220 v AC
Model NoPAP-TECH
Country of OriginMade in India
Materialms

It is used to check and evaluate the interfacial adhesion properties of flexible packaging material by retaining peak values,automatic or normal zero setting, overload and over travel protection facilities.

Digital peel tester is used for measuring the peeling strength of seals and lamination on in materials like laminates and laminated sheets. The machine will consist of a digital indicator with auto peak hold button on the indicator to measure the peel/ bond strength in grams, with a least count of 5 grams and a maximum reading of up to 10 kgs.

Salient Features:
  • Fixed Speed model.
  • Scaled down version of Generic Tensile Tester.

Standards:
  • As per TAPPI, SCAN, ISO
Request
Callback
Yes! I am interested

Paper Peel Seal Strength Tester

Paper Peel Seal Strength Tester
  • Paper Peel Seal Strength Tester
Get Best Quote
Approx. Price: Rs 1.35 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Load Cell Range0 - 500 gm.
Test Speed100 mm/min. 254 mm/min. 300 mm/min.
Frequency50 -60 HZ
Voltage220 v AC
BrandPap Tech
ModelPAP- 4056

It is used to check and evaluate the interfacial adhesion properties of flexible packaging material by retaining peak values,automatic or normal zero setting, overload and over travel protection facilities.

Digital peel tester is used for measuring the peeling strength of seals and lamination on in materials like laminates and laminated sheets. The machine will consist of a digital indicator with auto peak hold button on the indicator to measure the peel/ bond strength in grams, with a least count of 5 grams and a maximum reading of up to 10 kgs.

Salient Features:
  • Fixed Speed model.
  • Scaled down version of Generic Tensile Tester.

Standards:
  • As per TAPPI, SCAN, ISO
Request
Callback
Yes! I am interested

Vertical Paper Tensile Strength Tester

Vertical Paper Tensile Strength Tester
  • Vertical Paper Tensile Strength Tester
  • Vertical Paper Tensile Strength Tester
Get Best Quote
Approx. Price: Rs 1.5 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Analog OutputForce Value 0-10 V
Clamps15mm or 25 mm.
Model NoPAP-2065
Power Supply1 Phase
Pulling Speed1-99 mm/ min (0-04-4.0/min)
BrandPap-Tech

Vertical Tensile Strength Tester With Digital display of Tensile Strength & Stretch of Paper, Paperboard and similar materials complete with memory for retaining peak value, automatic or normal zero setting, overload and over travel protection facilities. With imported load cell & imported DC motor.

The Microprocessor Based Tensile Strength Tester is used for determining the tensile strength and stretch of sheet materials.

Technical - Specification :

  • Measuring Result : Individual results of Tensile Strength, Stretch, TEA, Tensile Stiffness, Breaking Length, Breaking time mean value & Standard Deviation.
  • Clamping Length : Selected.
  • Accuracy :  1% of reading down to 10% of the load cell capacity.
  • Resolutions : 0.025% of nominal load cell range and 0.1 mm in elongation measurement.
  • Computer Output : 1. RS 232 C & Printer port Model C 2 interface with pc having a specification a Pentium & specially developed software.


Application Standards:
SCAN P-38 ISO 1924/4, TAPPI 494, , APPITA/ AS 1301.448, BS 4415, CPPA D 34, DIN 533112, TEILL 1

Request
Callback
Yes! I am interested
X


Reach Us
Vipin Kumar Agarwal (CEO)
Pap-Tech Engineers & Associates
Gurushikhar-c,nanakpura Flat No. 506 Urf Hema Ki Nangal 5th Floor
Shivdaspura, Jaipur - 302022, Rajasthan, India


Call Us


Send E-mail